HP LaserJet 1018 Models
| Printer model |
Part number |
| HP LaserJet 1018 printer |
CB419A |
Minimum system requirements
The HP LaserJet 1018 printing-system software has the following minimum system requirements:
Processor and RAM requirements:
Windows 98SE and Windows ME: a computer with at least a Pentium 166 MHz processor and 32 MB or RAM Windows 2000: a computer with at least a Pentium 166 MHz processor and 64 MB or RAM Windows XP: a computer with at least a Pentium 233 MHz processor and 128 MB or RAM
150 MB or more of free hard-disk space CD-ROM drive (required for installation) Works with USB and Hi-Speed USB systems and cables
Print cartridges
The HP LaserJet Q2612A print cartridge provides fast printing at 12 pages per minute (ppm) for the HP LaserJet 1018, 15 pages per minute for the HP LaserJet 1020, or 19 ppm for letter-size paper for the HP LaserJet 1022.
Printer capacities and ratings
|
NOTE:
|
This product is NOT supported in a Macintosh environment. |
| Print speed |
12 ppm for A4 and 12 for letter
First page out in as low as 10 seconds |
| Main input tray capacity |
150 sheets of regular weight 75 g/m
2 (20 lb paper)
|
| Priority feed slot capacity |
1 sheets of media up to 163 g/m
2 (43 lb)
|
| Top (face down) output bin capacity |
100 sheets of regular weight 75 g/m
2 (20 lb paper)
|
| Media weight |
Output bin: 60 to 105 g/m
2 (16 to 28 lbs)
|
| Base memory |
2 MB of RAM |
| Print resolution |
600 x 600 dpi with HP Resolution Enhancement technology (REt).
1200 dpi effective output quality (600 x 600 x 2 dpi with HP Resolution Enhancement technology (REt)). |
| Duty cycle |
3,000 single-sided pages per month (maximum)
1,000 single-sided pages per month (average) |
Supported paper sizes
The printer supports media within this size range:
| Paper type |
Metric |
English |
| Letter |
216 x 279 mm |
8.5 x 11 in |
| Legal |
216 x 356 mm |
8.5 x 14 in |
| Executive |
184 x 267 mm |
7.25 x 10.5 in |
| A4 |
210 x 297 mm |
8.25 x 11.75 in |
| COM10 envelopes |
105 x 241 mm |
4.13 x 9.5 in |
| DL envelopes |
110 x 220 mm |
4.33 x 8.67 in |
| C5 envelopes |
162 x 229 mm |
6.4 x 9 in |
| B5 envelopes |
176 x 250 mm |
6.9 x 9.85 in |
| Monarch envelopes |
98.5 x 191 mm |
3.88 x 7.55 in |
| Labels |
216 x 279 mm |
8.5 x 11 in |
| Custom-size media |
custom (within acceptable range) |
custom (within acceptable range) |
|
NOTE:
|
Narrow and heavy media can cause the printer to print more slowly. |
Environmental specifications
| Operating environment |
Install in a well-ventilated, dust-free area.
Printer plugged into an AC outlet:
- Temperature: 10°C to 32.5°C (50°F to90.5°F)
- Humidity: 20% to 80% (no condensation)
|
| Storage environment |
Printer unplugged from an AC outlet:
- Temperature: 0°C to 40°C (32°F to 104°F)
- Humidity: 10% to 80% (no condensation)
|
Material Safety Data Sheets
Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example, toner) can be obtained by contacting the HP web site at: http://www.hp.com/go/msds or http://www.hp.com/hpinfo/community/environment/productinfo/safety.
Acoustic emissions
Acoustic emissions¹
|
Sound power level
|
Declared per ISO 9296
|
| Printing
2
|
L
WAd=<6.2 Bels (A) and 62dB (A)
|
| Ready (PowerSave) |
Inaudible |
|
Sound pressure level, bystander position
|
Declared Per ISO 9296
|
| Printing
2
|
L
WAd= ≤4.9 Bels (A) and 49dB (A)
|
| Ready (PowerSave) |
Inaudible |
|
1Configuration tested: HP LaserJet 1018 base unit, standard tray, A4 paper, and simplex continuous print.
|
|
2HP LaserJet 1018 speed is 12 ppm for A4 media and 12 ppm for letter media.
|
Electrical specifications
|
WARNING:
|
Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. Doing so might damage the printer and void the product warranty. |
|
110-volt models |
230-volt models |
| Power requirements |
110-127v (±10%)
50/60 Hz (±2 Hz) |
220v-240v (±10%)
50/60 Hz (±2 Hz) |
| Rated current |
3.5 amps |
2.0 amps |
Power consumption (average, in watts)¹
| Product model |
Printing
3
|
Ready
2, 4
|
Off |
| HP LaserJet 1018 |
250 W |
2 W |
0 W |
|
1Power reported is the highest value measured for monochrome printing using all standard voltages.
|
|
2The default time from Ready mode to PowerSave mode and the recovery time from PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the instant-on fusing.
|
|
3HP LaserJet 1018 speed is 12 ppm for A4 media and 12 ppm for letter media.
|
|
4The heat dissipation in Ready mode is 20 BTU/hour.
|
Physical specifications
| Dimensions |
- Width: 370 mm (14.6 inches)
- Depth: 242 mm (9.5 inches)
- Height: 209 mm (8.2 inches)
|
| Weight (2,000-page cartridge installed) |
5.8 kg (12.8 lb) |
Printer capacities and ratings
| Print speed |
- 12 ppm for A4 media and 12 ppm for letter media
- First page out in as low as 10 seconds
|
| Main input tray capacity |
150 sheets of regular weight 75 g/m
2 (20 lb) paper
|
| Priority feed slot capacity |
1 sheet of media up to 163 g/m
2 (43 lb)
|
| Top (face down) output bin capacity |
100 sheets of regular weight 75 g/m
2 (20 lb) paper
|
| Minimum paper size |
76 x 127 mm (3 x 5 inches) |
| Maximum paper size |
216 x 356 mm (8.5 x 14 inches) |
| Media weight |
Output bin: 60 to 105 g/m
2 (16 to 28 lbs)
|
| Base memory |
2 MB of RAM |
| Print resolution |
- 600 x 600 dpi with HP Resolution Enhancement technology (REt)
- 1200 dpi effective output quality (600 x 600 x 2 dpi with HP Resolution Enhancement technology [REt])
|
| Duty cycle |
- 3,000 single-sided pages per month (maximum)
- 1,000 single-sided pages per month (average)
|
|